PC OPTO DIO 48D SOURCE - Out Of Production OP-956
A full length card providing 24 input and 24 output high current, high voltage lines with 2500 Volts opto isolation. The 48 i/o lines, with isolated ground and external power input lines, are accessible from the edge connector, a 50 way 'D' connector for greater shielding. Fast TTL buffers and opto isolators allow a maximum throughput of 150kHz. Each input line is current limited and reverse connection protected so ensuring long term use in an industrial environment. OPTO DIO48 requires an external power input to supply the isolated side of the opto circuit range 17.5 - 35Volts. The 48 i/o lines, arranged as 6 eight bit port registers with one read/write watchdog register, occupy 8 i/o locations at base address in the range 200-3FF Hex, default=308H. Software enabled interrupts on input lines Port C#2 bits 0 and 3.
Out Of Production- Recommended Alternative Products
| OP-956 | OP-912 | OP-045 | OP-577 | ED-588 |
 |  |  |  |  |
| PC OPTO DIO 48D SOURCE | PC OPTO DIO 48D SINK | PCI OPTO DIO48 SOURCE | PC OPTO DIO 16D | Ethernet to 8 Digital Inputs and 8 Digital Outputs + RS485 Gateway |
Description
4 Digital Inputs/Ouputs
External Power In
17.5 - 35V, 24V Nominal
| Description
4 Digital Inputs/Ouputs
External Power In
17.5 - 35V, 24V Nominal
| Description
16 Digital Inputs and 16 Digital Outputs
External Power In
17.5 - 35V, 24V Nominal
| Description
8 Digital Inputs and 8 Digital Outputs
External Power In
17.5 - 35V, 24V Nominal
| IO Protocols
Modbus TCP or DCON ASCII (over TCP or Virtual COM port)
Description
8 Digital Inputs and 8 Digital Outputs
Digital Inputs
8
Digital Outputs
8
Analog Inputs
0
Analog Outputs
0
Serial Gateway
RS485 NuDam/ADAM compatible expansion port
Industrial Standard
Yes
|
    | |  |  |     |
| £ 250.00 (gbp) | £ 250.00 (gbp) | £ 0.00 (gbp) | £ 90.00 (gbp) | £ 189.00 (gbp) |
| Details | Details | Details | Details |
Customer Feedback
Operating Systems
Tech Spec
| IO Channels | |
| Description | 4 Digital Inputs/Ouputs |
| Watchdog | Active high/low, Pulsed high/low |
| Serial Port | |
| Opto Isolation Rating | 2,500V |
| Serial Port Settings | |
| External Power In | 17.5 - 35V, 24V Nominal |
| Output Drivers | UDN 2989 |
| Input Level Low | 0.0-2.4 Volts |
| Input Level High | 2.4-24.0V |
| Max Currents | -one input high: 7.25mA @ 24V, -all inputs high: 150mA |
| Power | |
| Max Input | 35 Volts |
| General | |
| Galvanic Isolation | Yes |
| Power Consumption | 800mA @ 5V |
| Product Weight | 0.162 kg |
| Product Dimensions | awaiting |
| Packaged Weight | awaiting |
| Packaged Dimensions | awaiting |
| GTIN (barcode) | |
| Operating System Compatibility | |
| Operating Systems |
|
| Interface | |
| ISA | Industry Standard Architecture |
Approvals
Other
Related Products
| OP-956 | OP-912 | OP-045 | OP-577 | ED-588 |
| | | | |
| PC OPTO DIO 48D SOURCE | PC OPTO DIO 48D SINK | PCI OPTO DIO48 SOURCE | PC OPTO DIO 16D | Ethernet to 8 Digital Inputs and 8 Digital Outputs + RS485 Gateway |
Description
4 Digital Inputs/Ouputs
External Power In
17.5 - 35V, 24V Nominal
| Description
4 Digital Inputs/Ouputs
External Power In
17.5 - 35V, 24V Nominal
| Description
16 Digital Inputs and 16 Digital Outputs
External Power In
17.5 - 35V, 24V Nominal
| Description
8 Digital Inputs and 8 Digital Outputs
External Power In
17.5 - 35V, 24V Nominal
| IO Protocols
Modbus TCP or DCON ASCII (over TCP or Virtual COM port)
Description
8 Digital Inputs and 8 Digital Outputs
Digital Inputs
8
Digital Outputs
8
Analog Inputs
0
Analog Outputs
0
Serial Gateway
RS485 NuDam/ADAM compatible expansion port
Industrial Standard
Yes
|
| | | | | |
| £ 250.00 (gbp) | £ 250.00 (gbp) | £ 0.00 (gbp) | £ 90.00 (gbp) | £ 189.00 (gbp) |
| Details | Details | Details | Details |