FAQs

  • Latest Software
  • General
  • Hardware
  • Software & Config
  • Installation
Where can I find the latest drivers for my PCI or PCMCIA card?
Ranges
CC, PM, UC, UP
Where can I find the latest Linux drivers for my PCI card?
Ranges
CC, PM, UC
How do I find out if an unusual baud rate is supported by my Brain Boxes Serial card?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
What is the difference between RS422 communication and RS485 communication?
Ranges
CC, ES, PM, PX, UC, UP, US, VX
How far will RS232 communicate?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
How far will RS422/485 communicate?
Ranges
CC, ES, PM, PX, UC, UP, US, VX
What is the cause of buffer overrun when transmitting data to my serial card?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
How do I test my Brainboxes card to make sure its working?
Ranges
CC, ES, PM, PX, UC, UP, US, VX
RS232 RS422 RS485 Standards
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
How to use Hyperterminal to test serial cards
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
How do I identify my Brainboxes product?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX, XC
What is the purpose of the buffer on a UART?
Ranges
BL, ES, PM, PX, UC, UP, US, VX
What is Autogating?
Ranges
CC, ES, PM, PX, UC, UP, US, VX
What is XOn / XOff Software Flow Control?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
What is a UART?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
What is RTS / CTS Hardware Flow Control?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
What is a FIFO?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
What does 450, 550, 750 UART compatibility mean, and why is there no 950 ?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
What is the pin-out of the small connector on my PCMCIA card?
Ranges
PM
What are the Pin outs of the 9 pin D and the pinout of the 25 pin D connector for my RS232 or RS422/485 port?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
How do I create a loop back connector?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
How do I change the COM label of my Brainboxes card?
Ranges
CC, ES, PM, PX, UC, UP, US, VX
How do I set my RS422/485 device into half duplex mode?
Ranges
CC, ES, PM, PX, UC, UP, US, VX
I do not have a Card Properties page in Device Manager
Ranges
CC, ES, PM, PX, UC, UP, US, VX
Do you have support for 64-bit Windows operating systems?
Ranges
BL, CC, ES, PM, PX, UC, UP, US, VX
How do I install my PCMCIA card?
Ranges
PM